Packaging Regulation 2025/40 (Ppwr): The Implications For Drugs, Medical Devices, Ivds, Cosmetics, Food Supplements And Foods For Specific Groups (Fsg)

Introduction to the PPWR
With the adoption of Regulation (EU) 2025/40 of the European Parliament and of the Council on the Packaging and Packaging Waste (PPWR), the European Union has introduced a new harmonized discipline on packaging and packaging waste, fully replacing the previous Directive 94/62/EC.
The Regulation entered into force on 11 February 2025, and first activities were implemented as of 12 August 2026, after a transitory period of 18 months. Being a Regulation, it is immediately binding for all Member States, with no further implementation. In particular, it immediately imposes new obligations for enterprises, in terms of design, labelling, traceability, and packaging environmental management, and has a transversal impact on all manufacturing sectors, including the categories of products regulated by dedicated legislation, such as medicinal products, medical devices, IVDs, cosmetics, food supplements and foods for specific groups (FSG) including foods for special medical purposes.
As stated under Article 1, the goal of the regulation is to contribute to the transition to a circular economy and to achieving climate neutrality at the latest by 2050, as provided for under Regulation (EU) 2021/1119 of the European Parliament and of the Council.
The main provisions of the PPWR, as stated under Article 1, are the packaging waste prevention, the reduction of the environmental impact of packaging for their entire life-cycle as well as their financially sustainable re-use and recycling.
Whom it is addressed to
The Regulation pays specific attention to the definition of the responsibilities of each economic operator intervening throughout the whole life-cycle of the packaging.
At the top of the responsibility pyramid there is the “manufacturer”, defined under Article 3 as any natural or legal person located in a Member State that manufactures packaging or a packaged product and has packaging or a packaged product designed or manufactured under its own name or trademark. This is the subject taking on the main responsibility of the conformity of the packaging with the PPWR requirements (technical documentation, Declaration of conformity, etc. as provided for by Article 15).
A central concept introduced by the Regulation is that of “producer”. This is an “umbrella” definition, useful to categorize all subjects who, along with the manufacturer – therefore suppliers, distributors, importers and authorized representatives – hold responsibility in the life-cycle of the packaging. The producer is defined as one established in a Member State and that makes available the packaging for the first time on the market of that Member State.
An appropriate identification of the producer is essential to apply the pivotal principle of Extended Producer Responsibility (EPR), based on which whoever put for the first time a packaging on the market of a Member State is not responsible only of this step, but remains responsible of the environmental impacts throughout the whole life-cycle of the product – collection, waste management and recycle – even after the packaging has left their direct availability.
The main PPWR requirements
The PPWR introduces requirements aimed at ensuring that the packaging is recyclable according to the criteria defined under Article 6 and Annex II, and that there is a minimum content of recycled materials in the plastic packaging, as defined by Article 7 and Annex VII, with stricter requirements as of 2040.
Moreover, within 12 August 2026, the limits imposed for some specific substances must be complied with.
Within 31 December 2026, the European Commission, in cooperation with ECHA (European Chemicals Agency), will present a report on hazardous substances in the packaging, and their impact on the re-use, recycling and chemical safety. Besides, as of 12 August 2028, the packaging is to be marked with a harmonized label (now the packaging environmental labelling is different among the various Member States) indicating the material composition to facilitate its selection and recycling, according to Article 12.
Specific impacts for (human and veterinary) drugs
Without prejudice to the general requirements described in section 3, the pharmaceutical sector will benefit of a dedicated exemption: immediate packaging of drugs, in direct contact with products, and the outer packaging, essential to preserve their quality and integrity, are excluded from recyclability and from the minimum content of recycled material. The current waiver protects the safety and stability requirements already established by the pharmaceutical legislation, and will be re-examined by the European Commission within 1 January 2035, in light of the progress of recycling technologies.
Implications for medical devices and IVDs
Medical devices and IVDs, regulated by the Regulations (EU) 2017/745 and 2017/746, must ensure integrity, sterility, and traceability, but are still affected by the PPWR and will be subject to the general principles of sustainable design established by the PPWR. Article 10 regulates the need to avoid the use of unjustified multi-packaging, while Article 11 introduces specific obligations for reusable packaging with the goal of reducing waste flow from secondary or tertiary packaging. In this sector, it will be required to check the compatibility between the new environmental obligations and the technical provisions on labelling, such as the UDI system, to prevent conflicts between regulatory requirements. Medical devices and in vitro diagnostics will also enjoy the exemptions provided for until 2035 for packaging in direct contact with the product (contact-sensitive).
Considerations for food supplements
As products regulated by the food legislations and subject to a regulatory framework other than the one for medicines, food supplements fully fall into the field of application of the Regulation, and do not enjoy any of the exemptions provided for until 2035. The obligation to reduce to the minimum the volume and the weight of the packaging, provided for by Article 10, might require a review of single-dose packs, blisters and boxes.
The requirements for the environmental labelling introduced under Article 12 shall also apply to food supplements. They impose clear, readable markings, harmonized for the whole EU, to allow consumers to carry out appropriate waste sorting.
Requirements for Cosmetics
In the cosmetic sector, where marketing- and packaging design-related aspects play an important role, the PPWR obliges to significantly rethink some packaging choices. Article 9 bans the packaging considered as “unnecessary”, as double packaging with aesthetic purpose but no technical function, while Article 6 requires that all packaging put on the market after 2030 are fully recyclable, based on criteria to be defined by the Commission by delegated acts. Also in this sphere, harmonized environmental labelling will be mandatory, and shall be consistent with the local disposal indications, in order to avoid any misunderstanding by the final users.
FSGs, including Foods for Special Medical Purposes
Special attention is dedicated to Foods for Special Groups (FSGs) intended for infants and young children, as well as to foods for special medical purposes. Actually, the PPWR provides for specific exceptions for given categories of contact-sensitive packaging. In particular, Article 6.11(e) excludes from the field of application of the recyclability requirements the contact-sensitive packaging intended for infant and follow-on formula, cereal based food and other baby food and food for special medical purposes. Similarly, Article 7.4(g) provides for an exemption from the obligations regarding the minimum content of recycled materials in the contact-sensitive plastic packaging only intended for such food categories. As for medicines, medical devices and IVDs, the exceptions provided for by Article 6.11, are subject to a re-examination by the Commission within 1 January 2035, taking into account the progress of sorting and recycling technologies and the experience acquired by the economic operators and the Member States.
Such exemptions however, are not automatic: manufacturers shall justify them via a documented assessment, demonstrating that the adoption of alternative solutions (for instance re-usable or recycled-content packaging) would compromise storage safety, hygiene or efficacy. It will also be required to ensure that the packaging does not contain hazardous substances that can be transferred to the food, in compliance with the European regulations on food safety and on materials coming into contact with food.
Conclusions and future prospects
In light of the outlined regulatory framework, the next steps for companies putting packaging on the market are clear and cannot be postponed anymore. The first consists in a precise identification of their responsibility within the supply chain, checking if they cover the role of producer according to the Regulation, and which are the obligations deriving from it. The second concerns the drafting and storage of technical documentation and of the declaration of conformity, that must be ready and made available to the competent authorities on request. The third, in a timeframe of one year, is the obligation of registration of producers into the national registers, which is an essential requirement to operate in compliance with the PPWR.
Di Renzo Regulatory Affairs is a reliable partner in the course of all these steps, offering expert support to draft documentation, to manage compliance and to meet deadlines, allowing companies to face the regulatory transition with confidence and operating continuity.
Written on 07/10/2026 by Di Renzo Regulatory Team
Previous Post