+390677209020 | +39 0267380552 info@direnzo.biz | sedemilano@direnzo.biz | Italian Language

ISO 13485: the reference standard for medical device quality

ISO 13485

Whoever deals with medical device, has to face this question sooner or later: what is ISO 13485?

It is an international standard defining the requirements for a quality management system, specifically thought for medical devices. The standard was born as an adjustment of another standard, ISO 9001, but it is different from that because of its greater attention to patients’ safety and conformity with regulatory European and international requirements.

The version currently in force, ISO 13485:2016, is acknowledged all over the world as a reference for manufacturers, distributors and economic operators of this sector.

The standard provides for the control of the whole life cycle of a device, from its design to the post-market surveillance.

For those wishes to consult the integral text, the standard is available on the market in several versions, including EN ISO 13485 in PDF format, downloadable from official websites such as ISO, UNI or other acknowledged regulating bodies.

Which are the corporate areas covered by ISO 13485?

The systemic approach of ISO 13485 implies that all corporate areas related to the medical device quality are involved.

It is not only about manufacturing, but also about design, supply, document management, staff training, in-house audits, control of suppliers, process validation, risk management and post-market surveillance.

The company management is also directly involved through activities such as the definition of the quality policy, the management review, and the resource allocation.

How to obtain the ISO 13485 certification

Obtaining the ISO 13485 certification requires a structured path. It usually starts with a preliminary analysis of the quality system already in use to identify any gap in the application of the standard requirements.

Following this evaluation, a compliance plan is defined including the draft or review of procedures, operative instruction and registrations. It is essential to train the staff involved, making it aware of the requirements to be complied with and of the changes that were introduced.

In case the company has no QMS, it will be necessary to create it from scratch.

This means, first of all, to define a policy for the quality and the goals that are consistent with ISO 13485. Then the procedures required by the standard shall be developed. Each relevant process shall be described in a documented manner and implemented operationally.

The minimum documentary structure includes a Quality Manual, standard operating procedures (SOPs), recording forms and working instructions, if any. Also in this case, the staff training is crucial to ensure an appropriate application of the system.

Once the system has been implemented, one or more in-house audits will be carried out, to verify that everything is compliant. Any non-conformity should be corrected before applying for a certification audit, that consists in two phases: a documentary phase and an operational phase. If the organisation demonstrates to have a complying system, they will receive the ISO 13485 certificate by an accredited certification body.

How to manage the life cycle of a product according to ISO 13485

The standard ISO 13485 requires that a medical device is followed throughout all the phases of its life cycle, from design to discontinuation. Each phase should be planned, monitored and controlled according to documented procedures.

For instance, during the design phase, it is necessary to define inputs and outputs, to make verifications, validation and re-examinations. During the manufacturing, the traceability of materials and processes must be guaranteed, critical operations must be validated and non-conform products must be controlled.

Even after marketing, the standard provides for that data are collected from the market, any complaint is examined and corrective or preventive measures are adopted. The whole approach is based on a risk management, that should be continuous and proportional to the complexity of the device.

How to manage the changes according to ISO 13485

Changes to products, processes, documents or equipment shall be managed in a controlled way. ISO 13485 establishes that each change is assessed before its implementation, to verify its impact on the product’s conformity and on the QMS.

Documented evidence of the examination carried out, of the approvals received and of the actions taken must be kept.

A good management of the change also includes informing all concerned parties about the changes, and training the involved staff, if needed. When the changes concern critical manufacturing processes or software, a new validation is also required to confirm that the outcomes are still complying with the initial requirements.

Who is the Quality Responsible Person in the ISO 13485?

The ISO 13485 provides for that the organisation appoints a figure responsible for the quality management system. This person – often identified as Quality Responsible Person – has the task of ensuring that the system is maintained effective and compliant with the requirements of the standard. Along with managing the audits and the management review, the responsible person should also ensure that the awareness and application of the regulatory requirements is promoted inside the organisation.

In many cases, this figure also acts as direct contact point with certification bodies and competent authorities, especially during audits or regulatory inspections.

Beyond the technical standard

ISO 13485 is much more than a mere technical standard: it is an actual strategic tool for companies operating in the sector of medical devices. Implementing a complying quality system not only guarantees patients’ safety and compliance of regulatory requirements, but it also contributes to improve in-house efficiency and market reputation.

Di Renzo Regulatory Affairs has a highly qualified staff dedicated to the quality management services, and can assist companies in the following activities:

  • Control and update of the SGQ documentation.
  • Advice for the preparation and maintenance of the Quality Management System according to the standard ISO 13485:2016
  • Drafting of the Quality Manual
  • Drafting of Standard Operating Procedures (SOP)
  • Preparation of the data recording system
  • Assumption of the role of Quality Assurance for ISO 13485 systems
  • Audit of Quality Management Systems of manufacturers and/or distributors
  • Pre- and post-inspections by Notified Bodies and Competent Authorities at manufacturers and medical device manufacturing sites.
  • Audits at manufacturers of medical devices to evaluate the level of conformity with ISO 13485
  • Assistance in the management of non-conformities and corrective and preventive actions (CAPAs)
  • Attendance of meetings of the executive management and/or support in the drafting of the minutes (Management Review)
  • In-house training on the QMS and on the general principles of specific ISO standards
  • Management of complaints and post-market surveillance procedures